2N3A3110-C TOSHIBA 东芝控制器

2N3A3110-C TOSHIBA 东芝控制器

2N3A3110-C电磁吸盘控制器：交流电压380V经变压器降压后，经过整流器整流变成110V直流后经控制装置进入吸盘此时吸盘被充磁，退磁时通入反向电压线路，控制器达到退磁功能。

门禁控制器：门禁控制器工作在两种模式之下。2N3A3110-C一种是巡检模式，另一种是识别模式。在巡检模式下，控制器不断向读卡器发送查询代码，并接收读卡器的回复命令。2N3A3110-C这种模式会一直保持下去，直至读卡器感应到卡片。当读卡器感应到卡片后，读卡器对控制器的巡检命令产生不同的回复，在这个回复命令中，读卡器将读到的感应卡内码数据传送到门禁控制器，使门禁控制器进入到识别模式。

2N3A3110-C在门禁控制器的识别模式下，门禁控制器分析感应卡内码，同设备内存储的卡片数据进行比对，并实施后续动作。门禁控制器完成接收数据的动作后，会发送命令回复读卡器，使读卡器恢复状态，同时，门禁控制器重新回到巡检模式。

2N3A3110-C TOSHIBA 东芝控制器
 

2N3A3110-C Electromagnetic suction cup controller: The AC voltage 380V is reduced by the transformer, rectified by the rectifier into 110V DC, and then entered into the suction cup by the control device. At this time, the suction cup is magnetized, and the reverse voltage line is entered during demagnetization, and the controller achieves the demagnetization function.

Access controller: The access controller works in two modes. 2N3A3110-C One is the inspection mode and the other is the recognition mode. In the inspection mode, the controller continuously sends the query code to the card reader and receives the reply command from the card reader. 2N3A3110-C This mode is maintained until the card reader senses the card. When the card reader senses the card, the card reader generates a different reply to the inspection command of the controller. In this reply command, the card reader transmits the code data of the sensor card to the access controller, so that the access controller enters the recognition mode.

2N3A3110-C In the recognition mode of the access controller, the access controller analyzes the code in the induction card, compares it with the card data stored in the device, and implements subsequent actions. After receiving data, the access controller sends a command to the card reader to restore the status of the card reader. At the same time, the access controller returns to inspection mode.