810-225420-002 印刷电路板 系统完成的重要环节

810-225420-002 印刷电路板 系统完成的重要环节

描述
型号：LAM 810-225420-002，由于商品数量较多，只上传了部分商品。如果您找不到您想要的商品，请咨询卖家，我们将竭诚为您服务。

此过程说明如何更换电源模块。在采取任何行动之前，请记住

LAM 810-225420-002，背板左下方的报警触点可以连接到信标或

声音警报，提醒维护人员出现问题。

维修或更换单个电源模块时，无需中断控制

LAM 810-225420-002 流程。

输入功率的额定功率应至少为每个电源 240 瓦。zui低限度

具有三个主处理器和一个电源的 Tricon 控制器机箱的功耗

模块为 50 瓦。额外的功耗取决于 I/O 和通信

模块安装在机箱中。

810-225420-002 印刷电路板 系统完成的重要环节

Description
Model: LAM 810-225420-002, due to the large number of products, only some products have been uploaded. If you can't find the item you are looking for, please consult the seller and we will be happy to serve you.

This section describes how to replace a power module. Before taking any action, please remember

LAM 810-225420-002, the alarm contact on the lower left of the backplane can be connected to a beacon or

Audible alarm to alert maintenance personnel of a problem.

Maintenance or replacement of a single power module without interruption of control

LAM 810-225420-002 Process.

The input power should be rated at least 240 watts per power supply. minimum

Power consumption of a Tricon controller case with three main processors and one power supply

Modules are 50 watts. The additional power consumption depends on I/O and communication

The module is installed in the chassis.